Part 47. Sanding the filler

We sanded the filler today (the whole car, took about 5 hours with two men working…) But the car is now ready for overcoat!

Some photos:

pitting-1
I said earlier that the area below the window frame was somewhat pitted – here’s a photo to illustrate.

pitting-2
I had to sand a lot of the filler away to smooth this, but finally got it done.

pitting-3
And here’s the area after a new coat of filler has been sprayed on (a thin layer this time).

windows-1
We also fitted the opening rear windows, as they needed some holes drilled (better do it before paint).

windows-2

windows-3

Two holes were drilled to B-pillar for the window frame attachments (only the lower one visible in the photo).

Leave a comment