The pedal box
…And other miscellaneous parts…
Yeah – more stuff than I actually need for this project…
Some metal work:
Here’s a few illustrative shots of how much had to be replaced because of corrosion.
Above: The footwell as it is now, after welding.
Below: The green part (the floor) is from the donor car (a longnose V4), the red parts were mostly made from sheet metal.
And here’s a shot of the driver foot area:
Test fitting the ”foot rests”
(As it later turned out, these were not the correct plates! Someone had changed them before my time. There’s about 3 or 4 different combinations used in 93…96 at different times)
Cut some new gaskets: